Vertex VX-510 Specifications download pdf (Page 13)

VX-510 OPERATING MANUAL

An important note about your radio !

Some of the radio/button functions discussed next will only operate in

your radio if so programmed by your dealer, or after the installation of

certain internal optional units. In this way, the radio’s operation can be

simplified and customized specifically for the user according to net-

work requirements. If pressing a button on your radio does not result

in the same function described in this manual, or if you are uncertain

of the functions your particular radio is configured with, contact your

dealer. See “P

RE-PROGRAMMED FUNCTIONS” on page 13.

Scanning

Scanning allows you to sequentially check for calls on all or only those

channels you select. To start scanning, press the S/DW button momen-

tarily. A beep then sounds and the display will clear and show “

SCASCA

SCA

”.

Scanning will pause when a signal is received, at which time the channel

number (or alphanumeric tag) will be displayed. A small “S” will be dis-

played above the channel, indicating the scanner is still active, but paused.

During this pause, you can press the PTT switch and talk to the station.

Otherwise, scanning will resume a few seconds after the signal is no longer

present. While scanning, if you momentarily press the PTT switch, opera-

tion automatically shifts to a default channel. This default channel can be

set to the priority channel (both “P” and “S/DW” are displayed), last-

busy channel, or home channel, depending on how your radio was pro-

grammed.

To stop scanning, simply press S/DW momentarily again. Operation will

return to the channel that was last selected when scanning was activated.

If enabled by dealer programming, you may select only the channels you

want to scan, and have others skipped-over by performing the following

routine.

Turn the radio OFF, then depress the S/DW button while turning the radio

back ON again. “

PROPRO

PRO

” will momentarily appear on the display, after

which it will revert to the currently selected channel (this indicates you are

in the programming mode). If user-access is disabled “

ININ

” will appear

briefly.

OPERATION

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

Comments to this Manuals

No comments

Vertex VX-510 Specifications Page 13

Comments to this Manuals